Grinding Belts

3M™ Cubitron™ II Cloth Belt 984F, 20 mm x 520 mm 36+

3M Precision Shaped Grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivity. Engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracks.Precision Shaped Grain requires less pressure, which can mean less operator fatigue.Belt life is significantly longer, producing more parts per belt and requiring fewer belt changes.Ceramic grain is engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat-related stress cracks. 3M™ Cubitron™ II Cloth Belt 984F offers revolutionary performance with 3M Precision Shaped Grain on a YF-weight polyester cloth backing. This high-performing belt contains a grinding aid, making it ideal for medium to high pressure applications on stainless steel and other exotic alloys, along with carbon steel, cobalt chrome, and nickel alloys. Creating a fast cut with a reduced heat build-up, 3M™ Cubitron™ II Cloth Belts 984F ensure a uniform finish over the life of the product while eliminating burning during end grain sanding applications. Our cloth belts use 3M™ Ceramic Abrasive Grain which is electrostatically orientated to form sharp peaks which act like individual cutting tools, slicing through metal quickly. These peaks continuously self-sharpen as they break off, providing long life and consistency with less grinding pressure. This is why our belt products can outcut and outlast every conventional ceramic industrial abrasive product on the market. They have a fabric splice, adding strength when grinding in medium to high pressure applications. Our abrasive belts come in a variety of widths and sizes to fit almost any industrial belt sander. Narrow belts are used with portable belt sanders for grinding or blending. Medium belts are used on backstands to remove wields, material removal and to set the grain in stainless steel while wider belts are used with wide belt sanders to dimension metal sheets and coils.

3M™ Trizact™ Cloth Belt 237AA 100x289mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 150x3500mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 30x533mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 40x760mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 50x2000mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 75x2000mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.