Coated Abrasives

3M™ Flap Disc 769F, 125 mm, 80+, Flat

3M™ Flap Disc 769F is long-lasting, high-performance abrasive flap disc featuring 3M™ Precision-Shaped Grain and a durable polyester backing. For a conformable and versatile flap disc that delivers on performance and durability, use 3M™ Flap Disc 769F. Proven to outperform traditional alumina zirconia flap discs, our discs feature 3M™ Precision-Shaped Grain. This abrasive continually fractures into sharp points slicing cleanly through metal, unlike traditional abrasives which tend to plough through the substrate. This fracturing, together with the breaking down of individual flaps to expose fresh mineral, helps to deliver a high cut-rate which is consistent over the life of the disc. The polyester backing further enhances their durability and this combined with their conformability means they hold up to high-pressure applications like bevelling, weld grinding and edge deburring. Plus, they leave a finish that makes them a great choice for applications like blending and surface prep. In many cases, 3M™ Flap Disc 769F will allow you to grind and finish in one step, without changing abrasives. This is because, under normal conditions, 769F will generate a finish that is one grade finer than a fibre disc of the same grade. While a fibre disc will cut faster, this flap disc can eliminate steps and disc change-outs to help you save time and boost productivity. They’re ideal for use on carbon steel, stainless steel and other heat-sensitive alloys.

3M™ High Performance Ribbed Back-Up Pad, 125 mm, Red

Use 3M™ Ribbed Back Up Pad with 3M™ Cubitron™ II and 3M™ Cubitron™ III discs for improved disc cut and lifespan. Our pad features a unique rib pattern and is resistant to temperatures over 212° F (100°C). It helps to improve efficiency and reduce costs. Maximise the lifespan and cut rate of 3M™ Cubitron™ II and 3M Cubitron III discs by using 3M™ High Performance Ribbed Back-Up Pad with them. When paired with 3M Cubitron II and 3M Cubitron III discs, our back-up pads help to make processes more efficient, while lowering costs.

3M™ High Performance Ribbed Back-Up Pad, 180 mm, Red

Use 3M™ Ribbed Back Up Pad with 3M™ Cubitron™ II and 3M™ Cubitron™ III discs for improved disc cut and lifespan. Our pad features a unique rib pattern and is resistant to temperatures over 212° F (100°C). It helps to improve efficiency and reduce costs. Maximise the lifespan and cut rate of 3M™ Cubitron™ II and 3M Cubitron III discs by using 3M™ High Performance Ribbed Back-Up Pad with them. When paired with 3M Cubitron II and 3M Cubitron III discs, our back-up pads help to make processes more efficient, while lowering costs.

3M™ Trizact™ Cloth Belt 237AA 100x289mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 150x3500mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 30x533mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 40x760mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 50x2000mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

3M™ Trizact™ Cloth Belt 237AA 75x2000mm

Excellent finish consistency Structured patterned abrasive Use dry Ideal for finishing applications Available in a range of grades 3M™ Trizact™ Cloth Belt 237AA is an aluminium oxide mineral abrasive on an durable cloth backing. It is resin bonded for heat resistance and features a grinding aid for cooler grinding. Use 3M™ Trizact™ Cloth Belts 237AA for finishing and polishing on stainless steel, carbon steel, high nickel alloys, titanium and aluminium. 237AA cloth belts are designed for the final touch-ups and refinements that come at the end of an abrasive sequence. An X-weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

Abrasive sleeve holder ø 13x25x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 15x30x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 19x25x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 25x25x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 30x30x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 38x25x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 45x30x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Abrasive sleeve holder ø 51x25x6mm

The cylindrical abrasive sleeve holder is an elastic rubber roll with slanted slots for easy mounting and replacement of the abrasive sleeves.

Rhodius LGA ALU Flap Disc 125×22,23mm P40

The ideal, long-life flap disc for grinding aluminium and other clog-prone non-ferrous metals. • Special coating of the flap belt • Notched carrier for gentle loosening • Trimmable ABS carrier

Rhodius LGA ALU Flap Disc 125×22,23mm P60

The ideal, long-life flap disc for grinding aluminium and other clog-prone non-ferrous metals. • Special coating of the flap belt • Notched carrier for gentle loosening • Trimmable ABS carrier

Rhodius Vision Cool Flap Disc 125×22,23mm P40

Zircon flap disc. Thanks to its three cut-outs, the VISION COOL becomes transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view on the workpiece • Controlled material abrasion • Cool grinding for less tarnish colours