Scotch-Brite™ Handpads and Rolls

Categories

Scotch-Brite™ Blending Hand Pad 7446, 152 mm x 228 mm, S MED

Scotch-Brite™ Blending Hand Pad 7446 uses an open, aggressive web for effective hand blending, general purpose cleaning, prep work, and finishing. The conformable material adapts to both flat and irregular contours without significantly altering the dimensions of base material. Unlike steel wool, the Blending Hand Pad won’t shred during use, rust after use, or leave fine metal splinters. Our Scotch-Brite™ Blending Hand Pad combines load resistance and uniform wear to provide a consistent cut-rate throughout the life of the pad. The 6 x 9” Blending Hand Pad can be used by hand for precise control, with a hand pad holder for uniform finishing, or on an inline sander to cover larger areas. This gray pad is filled with silicon carbide abrasive mineral, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers

Scotch-Brite™ Clean and Finish Roll CF-RL, 100 mm x 10 m, A VFN

cotch-Brite™ Clean and Finish Roll provides consistent surface conditioning for the life of the product. Our clean and finish roll stock can be cut into any length. Scotch-Brite™ Clean and Finish Roll delivers consistent results for finishing, blending, polishing, and cleaning on a variety of metals, wood, plastics surfaces as well as hard-to-reach areas. Our conformable clean and finish rolls can be easily cut into any length. Load resistance keeps the abrasive particles exposed, to maintain a consistent cut rate. These rolls can be used by hand for precise control. Wider width stock can be cut and paired with a hand pad holder for uniform finishing, or on an inline or oscillating sander to cover larger areas

Scotch-Brite™ Cut and Polish Roll 7440, 150 mm x 10 m, A MED, Brown

Scotch-Brite™ Cut and Polish Roll features a tough, tight and dense web that is conformable – allowing it to adapt to unique contours and get into hard to reach areas. Our cut and polish sheets can be used manually or on an in-line sander for metalworking, paint prep or coating and corrosion removal. Use Scotch-Brite™ Cut and Polish Sheet for aggressive blending and finishing. Our cut and polish sheets can be used by hand to clean and polish inside diameters or attached to an in-line sander for tougher jobs – including metalworking, paint prep and corrosion removal. These sheets feature aluminium oxide mineral. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding, sanding and finishing applications. Aluminium oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into a non-woven fibre matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres

Scotch-Brite™ Cut and Polish Sheet 7440, 158 mm x 224 mm, A MED, Brown

Scotch-Brite™ Cut and Polish Sheet features a tough, tight and dense web that is conformable – allowing it to adapt to unique contours and get into hard to reach areas. Our cut and polish sheets can be used manually or on an in-line sander for metalworking, paint prep or coating and corrosion removal. Use Scotch-Brite™ Cut and Polish Sheet for aggressive blending and finishing. Our cut and polish sheets can be used by hand to clean and polish inside diameters or attached to an in-line sander for tougher jobs – including metalworking, paint prep and corrosion removal. These sheets feature aluminium oxide mineral. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding, sanding and finishing applications. Aluminium oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into a non-woven fibre matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres

Scotch-Brite™ Hand Pad 7447 PRO, 152 mm x 228 mm, VFN

Scotch-Brite™ 7447 PRO Hand Pad combines flexibility with effective cutting action and precise hand control to help you accomplish tough cleaning jobs or produce fine finishing results, use after use. The tightly graded abrasive particles in this new pad provide a consistent, uniform scratch throughout life of the hand pad. Use Scotch-Brite™ Hand Pad 7447 PRO for a wide variety of materials and tasks. It combines flexibility with effective cutting action and precise hand control, for consistent fine finishing results. Our pad features tightly graded aluminium oxide abrasives, designed to leave a smooth, finished surface on wood, metal, plastics, ceramics, porcelain, glass, rubber and composites. It’s comparable to steel wool grade 0, but unlike steel wool won’t rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or some solvents, and rinsed clean for reuse. Use our maroon hand pad in a variety of ways. It fits comfortably into the hand for precise control and can be used with a hand pad block for uniform finishing, or on an in-line sander to cover larger areas. The fast cutting fine grade aluminium oxide abrasives within our pad are what make it the choice of many industry professionals. The durable abrasive self-fractures during use to continually create fresh cutting edges, compared with traditional abrasives, such as garnet, which quickly wear down with use. Aluminium Oxide is widely used in grinding applications in addition to sanding and finishing, for its high cut-rate, hardness, strength, and low heat retention. Use it on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. This pad is a unique surface conditioning product, featuring abrasives blended into non-woven nylon fibres – a breakthrough fibre coating technology that gives Scotch-Brite PRO abrasive products a faster cut rate and more consistent scratch than its competitor non-woven abrasive products. Using it reduces time and effort in finishing parts. Combining abrasives with fibres in this way create a system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibres.

Scotch-Brite™ Handpad 7448 PRO, SUFN, 158 mm x 224 mm

3M developed Scotch-Brite™ 7448 PRO Hand Pad to combine durability for long life, flexibility for reaching tight areas, and to be used in place of steel wool for conditioning metal surfaces and paint prep in less time than conventional non-woven abrasive products. The tightly graded abrasive particles in our new pad provide a consistent, uniform scratch throughout life of the hand pad. Reach into tight spots easily with our versatile, durable and flexible Scotch-Brite™ Hand Pad 7448 PRO – an efficient alternative to steel wool for faster conditioning of metal surfaces and paint preparation, in comparison to conventional non-woven abrasive products. Unlike fine steel wool, Scotch-Brite Hand Pad 7448 PRO pad will never shred during use, rust after use, or leave fine metal splinters. It’s made of a durable open-web design that resists loading and aids the pad’s longevity. It’s designed to run cleaner and longer than steel wool. Our pad uses tightly graded abrasive particles to deliver a consistent, uniform abrasive action for their entire lifespan. It’s designed for ease of use, reaching into tight corners and intricate detailed surfaces, without changing the size of the base material. Use for cleaning, finishing and buffing with no need to adjust, turn over or replace the pad mid-task. Use our versatile hand pad manually, paired with a hand pad block, or run on an in-line sander for working faster on larger areas. Our pad is filled with silicon carbide abrasive mineral, a very sharp synthetic mineral typically used for low-pressure applications such as paint preparation. The mineral breaks down faster than aluminium oxide for a superior finish. Scotch-Brite PRO abrasives are unique surface conditioning products, comprising of abrasives incorporated into non-woven nylon fibres. This breakthrough fibre coating technology creates a faster cut rate and more consistent scratch than competitive non-woven abrasive products, for greater efficiency in a range of tasks. The combination of abrasives and non-woven material creates an abrasive system that delivers consistent results throughout the pad’s lifetime. The open-web material is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibres.

Login

From your account you can view your recent orders, manage your shipping and billing addresses, and edit your password and account details.