Adhesives

3M™ Fastbond™ Contact Adhesive 30NF, Neutral, 5 L

Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range Adhesive can be applied by spray, brush or roller Non-flammable in the wet state Opening hours up to 4 hours 3M™ Fastbond™ Contact Adhesive 30NF is a water-dispersed, high-strength adhesive that has high coverage, immediate bond strength, a long bonding range and good heat resistance. Our adhesive bonds most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas to themselves and to each other. 3M™ Fastbond™ Contact Adhesive 30NF creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range. Ideal for decorative laminate applications where non-flammability and water based adhesives are desirable. Post-formable and heat resistant, it is non-flammable in the wet state, which may help reduce risk of fire and help keep manufacturers in compliance with insurance regulations. Not recommended for drywall laminating or for bonding metal surfaces.

3M™ Foam Fast 74 Spray Adhesive, Orange, 500 ml

Designed specifically for foams and fabrics Dispenses with a lace-spray pattern optimized for foam bonding Provides professional, industrial strength for demanding applications Offers a fast, aggressive tack for a quick assembly of high-stress bonds Allows for a bond time of 15 seconds to 30 minutes 3M™ Foam & Fabric 74 Spray Adhesive is a fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. Its permanent bond provides fast results to keep projects moving ahead. The non-yellowing formula dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed. Join urethane or latex foam and fabrics to themselves or to other wood, metal and plastic materials with 3M™ Foam Fast 74 Spray Adhesive. Our extremely fast tacking adhesive is an industrial grade spray glue. It provides excellent coverage and has soft non-dimpling glue lines and foam tearing strength. Store the spray adhesive at 16°C to 27°C for maximum storage life. Higher temperatures reduce normal storage life and lower temperatures may cause increased viscosity of a temporary nature.

3M™ Hi-Strength 90 Spray Adhesive, Transparent, 500 ml

Provides professional, industrial strength for demanding applications Comes with a variable-width web spray pattern High strength, fast, contact type adhesive Bonds laminate, wood, concrete, metal, plastic and more High temperature and moisture resistance 3M™ Hi-Strength 90 Spray Adhesive is an extremely versatile, fast-drying spray adhesive that bonds strongly to a wide range of materials. Our permanent bond provides fast results to keep projects moving ahead. The spray formula is easy to dispense, offering a variable-width spray pattern, and applies directly onto surfaces and materials where needed. Get fast and permanent bonding results with 3M™ Hi-Strength 90 Spray Adhesive. Our industrial grade, fast drying, easy to dispense, transparent spray adhesive bonds on concrete, wood, MDF, laminates, polyethylene, polypropylene SBR rubber and more. Our adhesive is high heat and moisture resistant, and delivers one minute drying time with an extremely strong permanent result and high productivity.

3M™ Hot Melt Adhesive 3748V-0, Light Yellow, 16 mm x 200 mm, 5 kg

Exhibits excellent low temperature thermal shock properties for optimal, long-term adhesion Good heat resistance provides durability throughout fluctuating temperatures Outstanding electrical properties offers an ideal solution for electrical applications Non-corrosive properties maintain the quality and strength of the adhesive over time High peel adhesion delivers long-term strength and resilience 3M™ Hot Melt Adhesive 3748 is a tough, flexible hot melt adhesive with exceptional low temperature thermal shock properties that is able to provide optimal adhesion in fluctuating temperatures. As a 100% solids thermoplastic resin, this hot melt adhesive offers excellent durability for a wide variety of applications. Delivers Durability, Provides Confidence Along with its low temperature thermal shock properties, we designed 3M™ Hot Melt Adhesive 3748 to provide good heat resistance, delivering a dependable adhesive solution in high temperatures without lifting or deformation. We also formulated this hot melt adhesive to offer exceptional electrical properties, making it ideal for electrical applications. A feature that makes 3M™ Hot Melt Adhesive 3748 a great solution for electrical applications is its non-corrosive properties, which maintain the quality and strength of the adhesive over time. 3M™ Hot Melt Adhesive 3748 also offers high peel adhesion for long-lasting strength and resilience. This product is capable of bonding to many substrates, especially materials that are normally hard to bond, such as polypropylene and polyethylene. Recommended Applications 3M™ Hot Melt Adhesive 3748 can be used in multiple industries including automotive, construction , furniture, signage, consumer goods, specialty vehicle, transportation, military, retail, electronics, woodworking and packaging. The recommended applications for this product include: Electronics Plastic Wood Foam Fabric Cardboard What to Know About Hot Melt Adhesives Hot melts are 100% solids thermoplastic resins. These adhesives are engineered to re-melt after bonding if exposed to high enough temperatures. The advantages of hot melt adhesives is that, unlike mechanical fasteners and sealing tapes, they are virtually invisible between surfaces. Our hot melt adhesives liquefy when heated, quickly fill gaps and wet the bonding surface. When they are applied to a surface, they cool, harden and reach their bond strength within seconds. Due to their quick work-life, you can move assemblies immediately upon application which eliminates the need for clamps, fixturing or additional drying time and energy. Exceed Your Expectations Discover the advantages of 3M™ Hot Melt Adhesive 3748, formulated to be flexible and r

3M™ Hot Melt Adhesive 3762LMQ, Beige, 16 mm x 200 mm, 5 kg

Aggressive hot tack rapidly achieves handling strength Short open time allows for fast assembly lines Securely bonds difficult to seal substrates such as lightly waxed surfaces Virtually invisible when bonded, eliminating unattractive mechanical fasteners and tape products Bonds to corrugated or paperboard cartons, wood, particle board, chipboard and cushioning foams 3M™ Hot Melt Adhesive 3762LM is a 100% solids, fast-setting hot melt adhesive designed for packaging and shipping applications. It is ideal for bonding corrugated fiberboard cartons, wood, particle board, chipboard and foam. The recommended application temperature range is 250-270°F (121-132°C). Keep productivity high when bonding and sealing substrates and lightly waxed surfaces with 3M™ Hot Melt Adhesive 3762. Use our economical hot melt adhesive for manual and corrugated carton sealing and general packaging. It’s a fast setting resin that forms an aggressive hot tack at a specified melt point, bonding to handling strength in seconds. Its medium work-life allows for positioning and fit adjustment. Our adhesive is virtually invisible when bonded, eliminating unattractive mechanical fasteners and tape products. Use it for bonding to corrugated or paperboard cartons, wood, particle board, chipboard and cushioning foams.

3M™ Hot Melt Adhesive 3762Q, Beige, 16 mm x 200 mm, 5 kg

Aggressive hot tack rapidly achieves handling strength for packaging and other applications Medium open time allows for positioning and fit adjustment Securely bonds difficult to seal substrates such as lightly waxed surfaces Virtually invisible when bonded, eliminating unattractive mechanical fasteners and tape products Bonds to corrugated or paperboard cartons, wood, particle board, chipboard and cushioning foams 3M™ Hot Melt Adhesive 3762 is a 100% is an economical, fast-setting resin solid hot melt adhesive. It’s designed for general purpose applications as well as manual and corrugated carton sealing and general packaging. When heated to its specified melt point this adhesive forms an aggressive hot tack that bonds to handling strength in seconds to help maintain high-tempo productivity. Keep Production Flowing 3M™ Hot Melt Adhesive 3762 is formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated and other fibrous substrates. It provides strong shear strength and low peel strength, which means your packages stay sealed and components stay bonded under most conditions. Economical and Safe A 30 second open time, along a 1/8″ bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. We manufacture this product using 100% solids, thermoplastic resin for use with our 3M™ Hot Melt Applicators. As a low-volatile-organic (VOC) compound, this adhesive produces minimal odor when heated and helps support a comfortable work environment. Recommended Applications General packaging Recouperage Repacking chipboard Point-of-Purchase Beadboard Displays Woodworking Trade exhibits Foam inserts Craft applications Bonding waxed surfaces The Hot Melt Advantage Hot-melt adhesive applicators, commonly called “glue guns” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250ºF/ 121ºC and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380ºF/ 193ºC. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive

3M™ Hot Melt Adhesive 3764Q, Transparent, 16 mm x 200 mm, 5 kg

100% solids thermoplastic adhesive allows for adjustment over time to meet different project demands Formulated to be flexible at low temperatures to ease modification and positioning during application Impact-resistant design delivers long-term durability Provides dependability through good shear and peel strength Compatible adhesive that is capable of bonding to many materials Our 3M™ Hot Melt Adhesive 3764 is a clear, 100% solids thermoplastic adhesive capable of bonding to many plastics, including polyolefin. Formulated to be flexible at low temperatures, we designed this hot melt adhesive to deliver exceptional performance for a wide range of applications and industries. For easier application and adjustment to meet different project demands use 3M™ Hot Melt Adhesive 3764. Our clear, hot melt adhesive is a 100% solids formula, for strength and thermoplastic for flexibility at low temperatures. It efficiently bonds various plastics, including polyolefin and has good impact resistance at low temperatures. It can be used for a wide range of applications and industries. Some of these include assembly, attaching, securing, repairing, potting, wire tacking, sealing and gluing.

3M™ Hot Melt Adhesive 3779Q, Gold-Yellow, 16 mm x 200 mm, 5 kg

Provides high heat resistance for a durable bond Resilient adhesive is fuel, oil, and impact resistant Multi-purpose adhesive works on a variety of substrates including some plastics Open bond time allows for fit adjustment and positioning Low odor helps maintain comfortable work environment Our 3M™ Scotch-Weld™ Hot Melt Adhesive 3779 is an amber colored, high performance thermoplastic adhesive formulated for strong resistance to heat, impact, fuel, and oil, and is effective for use in electronic applications such as potting and wire tacking. We manufacture this product using 100% solids, thermoplastic resin for use with our 3M Scotch-Weld™ Hot Melt Applicator PG TC Q and EC. Its 25 second open time, along a 1/8″ bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for assembling, joining, attaching, securing, repairing, panel bonding, bundling, sealing, encapsulating, rigidizing, foam bonding, gluing, packaging, adhering and closing. 3M Scotch-Weld Hot Melt Adhesive 3779 will also bond wood, polyolefins such as polyethylene and polypropylene, corrugated boxes, and lightweight substrates on furniture, upholstery and novelties and meets specifications for UL 94 Listing VO. About Hot and Low Melt Adhesives Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250-380°F/121-196°C, depending on the formulation, and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production.Low melt adhesives/ hot-glue sticks have a relatively low melting point that ranges between approximately 170 – 250°F/76 – 121°C, depending on the formulation, and are applied with low-temperature applicators, commonly referred to as hot-glue guns. Low-melt adhesives are beneficial in that they can be used to bond heat sensitive materials such as foam and a range of plastics. They provide a nearly instant bond but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The aggressive hot tack nature of low-melt adhesives speeds up production and assembly operations that involve light gage metals, some plastics, and other non-fibrous materials in addition to building display boards, floral displays, and hobby projects. These adhesives are also used in manufacturing, assembly and packaging processes, window, door, construction, transportation, electronics, and other industries, as well as in woodworking, assembling building store displays, convention sample boards, trophies, novelties, upholstery, furniture, audio components, and cabinets.

3M™ Hot Melt Adhesive 3792Q, Transparent, 16 mm x 200 mm, 5 kg

Dries clear for clean appearance Open bond time allows for fit adjustment and positioning 3792: Clear, multi-purpose for wood, fabric, upholstery, and other lightweight materials 3792LM: Low melt version for heat sensitive surfaces such as coated paper and P.O.P displays Excellent “Go-to” adhesives for POP display, carton sealing, furniture, upholstery, and woodworking We manufacture 3M™ Hot Melt Adhesive 3792 with 100% solids, thermoplastic resin. It produces minimal odor when heated, helping to support a comfortable work environment. This adhesive offer fast and reliable performance when paired with our 3M™ Hot Melt Applicators that designed to meet your handheld application needs. Our multi-purpose adhesive features a 40 – 50 second open bond, to allow for positioning and fit adjustment on wood, polyethylene, polypropylene, corrugated boxes, and lightweight substrates on furniture, upholstery and novelties. Its nearly instant bonding property reduces production time for POP assembly, joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, and packaging. We manufacture 3M Hot Melt Adhesive 3792 with 100% solids, thermoplastic resin for use with either the 3M™ Scotch-Weld™ Hot Melt Applicator LT, LT Quadrack or EC, depending on version. It produces minimal odor when heated, helping to support a comfortable work environment. This thermoplastic adhesive has excellent thermal shock, heat resistance, electrical insulating properties, and is non-corrosive. About Hot Melt Adhesives Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250 – 380°F (121 – 196°C), depending on the formulation, and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production. Low melt adhesives/ hot-glue sticks have a relatively low melting point that ranges between approximately 170 – 250°F (76 – 121°C), depending on the formulation, and are applied with low-temperature applicators, commonly referred to as hot-glue guns. Low-melt adhesives are beneficial in that they can be used to bond heat sensitive materials such as foam and a range of plastics. They provide a nearly instant bond but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The aggre

3M™ Neoprene High Performance Rubber and Gasket Adhesive 1300, Yellow, 1 L

Adheres neoprene, SBR, butyl, and other types of rubbers to other various substrates Excellent moisture and heat resistance and will perform up to up to 300°F/148°C Can be used as a contact or wet-bond adhesive Available in tubes, cans or pails Compatible with industrial spray equipment 3M™ Neoprene High Performance Rubber and Gasket Adhesive 1300 is a versatile, solvent based adhesive. It offers high immediate strength and good heat resistance, and is commonly used for bonding most rubber and gasket materials. It is also suitable for large area rubber sheeting applications, bumpers and more. Bond most rubber and gasket materials to most metal, baked enamel, wood, plastics and neoprene, SBR and butyl rubber with 3M™ Neoprene High Performance Rubber and Gasket Adhesive 1300. Our adhesive dries quickly when applied and offers good heat resistance. Applications also include adhering, gluing, joining and attaching. It has a lower viscosity for spraying.

3M™ Nitrile High Performance Plastic Adhesive 1099, Tan, 1 L

High performance adhesive forms strong bonds on most vinyls and plastics Resists weathering, water, oil, plasticizer migration and fuels Provides strong, quick drying flexible bonds Optional heat cure increases bond strength Sprayable with industrial grade spray equipment 3M™ Nitrile High Performance Plastic Adhesive 1099 dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration. Resist weather, water, oil, plasticizer migration, and alphalitic fuels with 3M™ Nitrile High Performance Plastic Adhesive 1099. Our adhesive is fast drying and heat curable. It bonds at a high strength and is excellent for bonding most vinyl extrusions and sheeting. It also bonds many fabrics.

3M™ Repositionable 75 Spray Adhesive, Transparent, 500 ml

Finger-touch, targeted control ensures minimal overspray, waste, and cleanup Low soak-in formula allows it to bond delicate substrates without damaging the material Adhesive remains tacky to allow materials to be repositioned repeatedly Formula resists bleeding, staining for reliable and effective performance Dries clear, produces a smooth glue line and resists wrinkling on most materials to produce a clean appearance 3M™ Repositionable 75 Spray Adhesive is our versatile pressure sensitive adhesive spray, suitable for temporary holding or positioning of lightweight materials for display or prior to final assembly. It adheres in seconds, yet has an extra-long tack range that allows lifting and repositioning of materials. Adhere materials in seconds for display or prior to final assembly with 3M™ Repositionable 75 Spray Adhesive. Our versatile pressure sensitive spray adhesive is suitable for temporarily holding or positioning of lightweight materials. It has an extra-long tack range that permits lifting and repositioning of materials. It’s low soak in formula allows it to join delicate substrates without damaging the material. The formula resists bleeding, staining for an effective and reliable performance. Our spray adhesive dries clear, makes a smooth glue line and resist wrinkling on most materials for a clean appearance.

3M™ Rubber And Vinyl 80 Spray Adhesive, Yellow, 500 ml

3M™ Rubber And Vinyl 80 Spray Adhesive is a high performance neoprene based contact aerosol spray adhesive. Get high performance, superior strength and exceptional temperature resistance with 3M™ Rubber And Vinyl 80 Spray Adhesive. Our fast setting, neoprene based contact aerosol spray adhesive bonds rubber, supported vinyl, leather, wood, metal and various plastics. Store the spray adhesive at 16°C to 27°C for maximum storage life. Higher temperatures reduce normal storage life and lower temperatures may cause increased viscosity of a temporary nature.

3M™ Scotch-Weld™ Epoxy Adhesive DP100, Transparent, 48.5 ml

Adhesive formula cures rigid for high static load holding High shear ensures permanent bonds Fast 5 minute work life with handling strength in 20 minutes at room temperature Low viscosity, clear formulation High shear ensures permanent bonds 3M™ Scotch-Weld™ Epoxy Adhesive DP100 is a two-part, rigid epoxy adhesive offering a fast cure and machinability. It is a fast-setting epoxy that cures at room temperature to form a rigid bond. Has low viscosity for easy dispensing and leveling. Get a very flexible, fast-setting, two-part epoxy adhesive that dries and stays clear even when cured in larger masses with 3M™ Scotch-Weld™ Epoxy Adhesive DP100. Our adhesive has many benefits, including easy mixing, fast cure, rigid bonds, low viscosity and more. Our adhesive formula provides a strong, permanent bond even under vibration and impact, high shear and peel strength and handling strength in approximately 15 minutes at room temperature. It makes bonding and joining, gluing and attaching, assembling and sealing, encapsulating and potting a much easier process.

3M™ Scotch-Weld™ Epoxy Adhesive DP110, Transparent, 48.5 ml

Very flexible adhesive formula provides strong, permanent bond even under vibration and impact Provides high shear and peel strength on metals and many plastics Allows for some differential thermal expansion between substrates Provides handling strength in approximately 20 minutes at room temperature Flexible when cured, making it a good choice for multi-material bonding 3M™ Scotch-Weld™ Epoxy Adhesive 110 is a general purpose, fast setting, flexible, two-part epoxy adhesive. This medium viscosity adhesive cures to handling strength in 20 minutes in order to provide a flexible bond on materials such as metals, ceramics, woods and many plastics. Strong and Flexible Bonds 3M™ Scotch-Weld™ Epoxy Adhesive 110 is a versatile, 1:1 mix ratio, two-part epoxy adhesive designed to cure quickly to provide a flexible bond. It works on a variety of substrates including metals, ceramics and glass, wood, and many plastics. Dispenses with minimal dripping, running and for controlled, accurate dispensing. This adhesive features high shear strength and good peel performance that, when combined with good flexibility, makes it ideal for applications involving dissimilar surfaces, including those in the transportation, specialty vehicle, electrical, general industrial, sporting goods, construction, and consumer goods industries. Recommended Applications Bonding and joining Gluing and attaching Assembling and sealing Encapsulating and potting Cures Quickly to Minimize Delays This adhesive has a 1:1 mix ratio, and 10 minute work life; so there’s some opportunity for repositioning and to adjust for fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 48 hours at room temperature.

3M™ Scotch-Weld™ Epoxy Adhesive DP190, Grey, 48.5 ml

3M™ Scotch-Weld™ Epoxy Adhesive DP190 is a two-part epoxy adhesive that delivers exceptional performance with high shear and peel strength. Extremely compatible, we formulated this epoxy adhesive to bond to a wide range of materials, such as metals, ceramics, wood, fiberboard, glass, rubber and many plastics. Bond 3M™ Scotch-Weld™ Epoxy Adhesive DP190 to a wide range of materials, such as metals, ceramics, wood, fibreboard, glass, rubber and many plastics. Our two-part epoxy adhesive has high shear and peel strength. It adheres with tough, strong bonds and offers an extended work life. The adhesive is designed with low viscosity formulation to give additional time for adjustment and make application easy.

3M™ Scotch-Weld™ Epoxy Adhesive DP420NS, Black, 50 ml

High peel and shear strength maintains lasting bond at high and low temperatures Toughened for impact and fatigue resistance 20 minute work life provides time for positioning and adjustment Non-sag formulation ensures adhesive stays where applied Available in a variety of package sizes 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS is a black, toughened, non-sag, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M™ Scotch-Weld Epoxy Adhesive DP420NS can replace mechanical fasteners, screws, rivets and spot welds in many applications. When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. High Peel and Shear Strength Maintains Lasting Bond at High and Low Temperatures Our 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS maintains bond strength at high and low temperatures and can withstand paint bake operations up to 204°C (400°F) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites and plastics, and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding. 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS meets the requirements for UL 94 HB. Recommended Applications Small joint assembly Heavy-duty mounting assembly Metalworking Carbon fiber epoxy bonding 20 Minute Work Life Provides Time for Positioning and Adjustment 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS reaches handling strength in approximately two hours and is fully cured in 24 hours (at 72°F/22°C.) The mix ratio is 2:1 and provides a 20 minute work life, providing time to adjust for desired fit prior to curing. This adhesive is available in a variety of package sizes and can be dispensed in several ways to meet the demands of the user and the job. Toughened for Impact and Fatigue Resistance 3M™ Scotch-Weld ™ Epoxy Adhesive DP420NS is appropriate for applications that will face tough environmental challenges. Formulated to provide strong adhesion for the long-term, this resilient epoxy is another way 3M has applied our expertise to meet and exceed the demands of even the toughest applications. What are Epoxy Adhesives? Epoxy adhesives are part of the class of adhesives called “structural adhesives,” which also includes polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the

3M™ Scotch-Weld™ Epoxy Adhesive DP460, Off-White, 50 ml

60 minute work life allows sufficient time for adjustments Toughened for impact resistance and high fatigue resistance to withstand demanding conditions Easy-to-mix and apply for straightforward application High peel and shear strength for strong bonds in critical applications 60 minute work life, reaches handling strength in around 4-6 hours Whether joining, adhering, attaching, repairing, potting, panel or structural bonding, use 3M™ Scotch-Weld™ Epoxy Adhesive DP460. Our 60 minute work-life adhesive gives the highest shear, peel, impact, vibration and fatigue resistance in the Scotch-Weld™ Epoxy Adhesive family. Use 3M™ Scotch-Weld™ Epoxy Adhesive DP460N for a wide variety of situations needing a super strong adhesive. Whether you are joining, adhering, attaching, repairing, potting, panel or structural bonding, our epoxy resin provides the highest shear, peel, impact, vibration and fatigue resistance in our Scotch-Weld™ Epoxy Adhesive family. Our adhesive keeps its bond strength, even in high and low temperatures. It’s perfect for the most demanding applications, including paint bake operations. The adhesive’s high viscosity formula won’t sag or run. It lets you to work confidently with a long work time (60 minutes), allowing for positioning and adjusting the fit before setting. Available in bulk or duo-pack cartridges, for immediate mixing and dispensing with easy hand application.

3M™ Scotch-Weld™ Epoxy Adhesive DP490, Black, 400 ml

High strength to withstand demanding conditions Non-sag for easy application to vertical surfaces High peel and shear strength for strong bonds in critical applications Bonds difficult surfaces such as powder coats and most plastics 3M™ Scotch-Weld™ Epoxy Adhesive 490 is a black, thixotropic, gap filling two component epoxy adhesive with particularly good application characteristics. It is designed for use where ultimate toughness and high strength are required. High temperature resistance up to 120°C. High resistance to impact and outstanding stability under static and dynamic loads. Very good strength and aging characteristics. Thixotropic formulation enables easy application to vertical surfaces. It shows special benefits in the construction of composite assemblies. The product has excellent heat and environmental resistance.

3M™ Scotch-Weld™ Epoxy Adhesive DP490, Black, 50 ml

3M™ Scotch-Weld™ Epoxy Adhesive 490 is a black, thixotropic, gap filling two component epoxy adhesive with particularly good application characteristics. It is designed for use where ultimate toughness and high strength are required. High temperature resistance up to 120°C. High resistance to impact and outstanding stability under static and dynamic loads. Very good strength and aging characteristics. Thixotropic formulation enables easy application to vertical surfaces. It shows special benefits in the construction of composite assemblies. The product has excellent heat and environmental resistance.