Shop

3M™ Perfect-It™ Foam Compounding Pad, Green, Flat, 150 mm, 50487

3M™ Perfect-It™ Foam Compounding Pads are 3M’s highest-performing foam compounding pads for refining sand scratches, slow-speed polishing, denibbing and more. Foam face pattern provides more surface contact, holds compound better and reduces slinging. Doubled-sided pads work with 3M™ Quick Connect Adaptors on rotary polishers; single-side pads work with the Hookit™ system for easy change-outs.

3M™ Perfect-It™ Polishing Pad, Yellow, Convoluted, 150 mm, 50488

Use 3M™ Perfect-It™ Polishing Pad for finer and softer polishing and a more efficient way to achieve an exceptional high gloss finish in repair works. It helps to quickly and efficiently achieve a perfect finish.Efficiently remove light scratches, swirl marks and defects from refinished and new paintwork using our 3M™ Perfect‐It™ Polishing Pad. Made from waffle foam, our pads are designed for repeated long term use, to provide excellent value for money. They’re big enough to take care of jobs efficiently, yet small enough to store away easily. For best results, use with the 3M machine polisher and 3M™ Perfect‐It™ Extra Fine Compound 80349 – designed for easy attachment to our 3M back-up pads. Part of our award-winning next generation range of colour coded compounds, polishes and pads, our pad is designed to help you repair paint defects with greater ease and efficiency.

3M™ Perfect-It™ Ultrafina SE Polish, 1 L, 50383

Produces a swirl (“hologram”) free finish even on black vehicles Use 3M™ Perfect-It™ Ultrafine SE Polish with our machine polishers, for an exceptional high gloss finish to vehicles – no swirl marks or holograms. Designed for use as the final stage of our colour code process, to help you achieve the ultimate final finish, and fast clean up afterwards. For an exceptional final finish, and no unsightly swirl marks or holograms, use our 3M™ Perfect-It™ Ultrafine SE Polish with your machine polishers. Our compound is part of an award-winning next range of next generation colour-coded products, designed for use in the final stage of our colour-code process, to help you achieve enviable high gloss results. Our polish is quick and easy to clean up, giving you more time for other jobs.

3M™ Perfect-It™ Ultrafine Polishing Pad, Blue, Convoluted, 150 mm, 50388

Get a high gloss shine on dark coloured paint finishes Used to help eliminate swirl marks and apply high gloss finishes Waffle face provides sufficient contact surface while holding polish well Ideal to work with 3M™ Perfect-It™ Ultrafina SE 3M™ Perfect-It™ Ultrafine Polishing Pad helps to eliminate swirl marks on painted surfaces, even on difficult dark colored cars. Featuring a unique waffle face design that holds liquid polish, this pad applies polish evenly without releasing excess polish that may cause ripples in the finish. For an exceptional finish, and no unsightly swirl marks or holograms, use 3M™ Perfect-It™ Ultrafine Polishing Pad. We’ve designed our soft fine pore pad to evenly distribute polish and efficiently remove swirl marks on painted surfaces, even on difficult, dark coloured cars. Use with 3M Ultrafine Machine Polish and ideally with Quick Connect Adaptor (depending on pads choosen). Our soft blue foam polishing pad is part of our award-winning next generation colour coded range. It’s designed to help achieve an exceptional finish. Cleaning up is fast and efficient, too.

3M™ Performance Plus Duct Tape 8979N, Slate Blue, 48 mm x 55 m, 0.31 mm

Seal, hold and protect Get UV, curl, sunlight and weather resistance Remove cleanly from most opaque surfaces Curl-resistant, moisture-resistant, and conformable backing for easy handling Removes cleanly from most opaque surfaces after up to six months of UV exposure and weather Seal, hold and protect with the highly specialised 3M™ Performance Plus Duct Tape 8979N. Our tape is ideally suited for demanding applications in the nuclear power plant, ship building, and steel fabrication industries. Use 3M™ Performance Plus Duct Tape 8979N for demanding applications in the nuclear power plant, ship building, and steel fabrication industries. Our tape seals, holds and protects, and comes in distinctive red and slate blue colours. It’s UV, curl, sunlight and weather resistant for up to a year without deterioration, and has a conformable backing for easy handling. It also removes cleanly from most opaque surfaces after up to six months of UV exposure and weather.

3M™ Professional Masking Tape 2090, Multi-surface, Blue, 18 mm x 50 m

Universal – can be used on multiple surfaces Medium adhesion, great for smooth surfaces such as glass, tiles, treated wood (varnished, glazed), windows and floors 14-days clean removal leaves behind no damage or sticky residue For use both indoors and outdoors UV and water-resistant Colour: Blue 3M™ Professional Masking Tape 2090 is a universal tape for masking a variety of surfaces such as windows, glass, woodwork, plastic, tiles and metal. Get clean paint lines when masking both indoor and outdoor surfaces with 3M™ Professional Masking Tape 2090. This tape is UV and water resistant making it your versatile, go to tape for many different professional masking applications. It adheres consistently to most surfaces without paint bleeding, ensuring clean paint lines. It can be removed cleanly without leaving residue for up to 14 days after application.

3M™ Professional Masking Tape 2090, Multi-surface, Blue, 24 mm x 50 m

Universal – can be used on multiple surfaces Medium adhesion, great for smooth surfaces such as glass, tiles, treated wood (varnished, glazed), windows and floors 14-days clean removal leaves behind no damage or sticky residue For use both indoors and outdoors UV and water-resistant Colour: Blue 3M™ Professional Masking Tape 2090 is a universal tape for masking a variety of surfaces such as windows, glass, woodwork, plastic, tiles and metal. Get clean paint lines when masking both indoor and outdoor surfaces with 3M™ Professional Masking Tape 2090. This tape is UV and water resistant making it your versatile, go to tape for many different professional masking applications. It adheres consistently to most surfaces without paint bleeding, ensuring clean paint lines. It can be removed cleanly without leaving residue for up to 14 days after application.

3M™ Protective Coverall 4530+, Blue, 2XL

excellent barrier against dry particles and certain limited liquid chemical splash (CE Type 5/6)

Soft and strong multi-layered 54gsm SMS for strong performance Made from super breathable SMMS non-woven for effective release of body heat and moisture and reduced heat stress Specialised flame spread resistance material treatment for use with Index 2/3 garments Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3 panel hood, 2-way zip and storm flap with elasticated back and ankles to reduce the risk of skin exposure 3M™ Protective Coverall 4530 has a specialist material treatment which offers fabric flame spread resistance to allow the garment to be worn over an Index 2/3 FR garment, enhancing the chemical splash and hazardous dust protection and extending the life cycle through reduced laundering. Certified to Cat III hazardous dust and splash type 5/6 protection and Antistatic EN 1149. Use 3M™ Protective Coverall 4530 for protection against dirt, splashes and toxic dusts, including nuclear particles. It meets a variety of standards for chemical protective clothing including EN 1149 Antistatic protection, EN 1073-2 Nuclear particulate resistance, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. You can identify it easily with the white triangle in the blue suit which is made of the same 54gsm SMMS as the rest. This coverall includes a specialist treatment of the material only (not components) which offers flame spread resistance complying with ISO 14116 Index 1. This means the disposable coverall can be used with an FR Index 2/3 garment to offer improved certain chemical splash and hazardous dust performance and extend the life of the reusable garment by minimizing the need to launder. The 3M protective coverall 4530 is soft and breathable yet robust and strong weighing in at 54gsm. It’s made with SMMS which is a layer of spunbond on the inner and outer and 2 layers of meltblown material in the middle. The Spunbond acts as the smooth strength and splash protection, while the Meltblown layers provide an intricate multilayered web of microfibres that filter out dry particulates. Soft, breathable and very lightweight, the non-woven material allows for easier release of body heat and moisture, giving extended comfort wear for increased productivity in the workplace.

3M™ Protective Coverall 4530+, Blue, M

excellent barrier against dry particles and certain limited liquid chemical splash (CE Type 5/6) Soft and strong multi-layered 54gsm SMS for strong performance Made from super breathable SMMS non-woven for effective release of body heat and moisture and reduced heat stress Specialised flame spread resistance material treatment for use with Index 2/3 garments Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3 panel hood, 2-way zip and storm flap with elasticated back and ankles to reduce the risk of skin exposure 3M™ Protective Coverall 4530 has a specialist material treatment which offers fabric flame spread resistance to allow the garment to be worn over an Index 2/3 FR garment, enhancing the chemical splash and hazardous dust protection and extending the life cycle through reduced laundering. Certified to Cat III hazardous dust and splash type 5/6 protection and Antistatic EN 1149. Use 3M™ Protective Coverall 4530 for protection against dirt, splashes and toxic dusts, including nuclear particles. It meets a variety of standards for chemical protective clothing including EN 1149 Antistatic protection, EN 1073-2 Nuclear particulate resistance, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. You can identify it easily with the white triangle in the blue suit which is made of the same 54gsm SMMS as the rest. This coverall includes a specialist treatment of the material only (not components) which offers flame spread resistance complying with ISO 14116 Index 1. This means the disposable coverall can be used with an FR Index 2/3 garment to offer improved certain chemical splash and hazardous dust performance and extend the life of the reusable garment by minimizing the need to launder. The 3M protective coverall 4530 is soft and breathable yet robust and strong weighing in at 54gsm. It’s made with SMMS which is a layer of spunbond on the inner and outer and 2 layers of meltblown material in the middle. The Spunbond acts as the smooth strength and splash protection, while the Meltblown layers provide an intricate multilayered web of microfibres that filter out dry particulates. Soft, breathable and very lightweight, the non-woven material allows for easier release of body heat and moisture, giving extended comfort wear for increased productivity in the workplace.

3M™ Protective Coverall 4530+, Blue, XL

excellent barrier against dry particles and certain limited liquid chemical splash (CE Type 5/6)

Soft and strong multi-layered 54gsm SMS for strong performance Made from super breathable SMMS non-woven for effective release of body heat and moisture and reduced heat stress Specialised flame spread resistance material treatment for use with Index 2/3 garments Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3 panel hood, 2-way zip and storm flap with elasticated back and ankles to reduce the risk of skin exposure 3M™ Protective Coverall 4530 has a specialist material treatment which offers fabric flame spread resistance to allow the garment to be worn over an Index 2/3 FR garment, enhancing the chemical splash and hazardous dust protection and extending the life cycle through reduced laundering. Certified to Cat III hazardous dust and splash type 5/6 protection and Antistatic EN 1149. Use 3M™ Protective Coverall 4530 for protection against dirt, splashes and toxic dusts, including nuclear particles. It meets a variety of standards for chemical protective clothing including EN 1149 Antistatic protection, EN 1073-2 Nuclear particulate resistance, EN ISO 13688, Type 6 Liquid Splash EN 13034 and Type 5 Dust EN ISO 13982-1. You can identify it easily with the white triangle in the blue suit which is made of the same 54gsm SMMS as the rest. This coverall includes a specialist treatment of the material only (not components) which offers flame spread resistance complying with ISO 14116 Index 1. This means the disposable coverall can be used with an FR Index 2/3 garment to offer improved certain chemical splash and hazardous dust performance and extend the life of the reusable garment by minimizing the need to launder. The 3M protective coverall 4530 is soft and breathable yet robust and strong weighing in at 54gsm. It’s made with SMMS which is a layer of spunbond on the inner and outer and 2 layers of meltblown material in the middle. The Spunbond acts as the smooth strength and splash protection, while the Meltblown layers provide an intricate multilayered web of microfibres that filter out dry particulates. Soft, breathable and very lightweight, the non-woven material allows for easier release of body heat and moisture, giving extended comfort wear for increased productivity in the workplace.

3M™ Protective Coverall 4530+, Blue,L

excellent barrier against dry particles and certain limited liquid chemical splash (CE Type 5/6)

Soft and strong multi-layered 54gsm SMS for strong performance Made from super breathable SMMS non-woven for effective release of body heat and moisture and reduced heat stress Specialised flame spread resistance material treatment for use with Index 2/3 garments Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3 panel hood, 2-way zip and storm flap with elasticated back and ankles to reduce the risk of skin exposure 3M™ Protective Coverall 4530 has a specialist material treatment which offers fabric flame spread resistance to allow the garment to be worn over an Index 2/3 FR garment, enhancing the chemical splash and hazardous dust protection and extending the life cycle through reduced laundering. Certified to Cat III hazardous dust and splash type 5/6 protection and Antistatic EN 1149.

3M™ Protective Coverall 4540+, 2XL

Excellent barrier against dry particles and certain liquid chemical splash (CE Type 5/6) Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4540+ is made from a laminated premium bicomponent non-woven and features a breathable SMMMS triangular back panel for improved comfort. This soft and lightweight coverall provides an excellent barrier to hazardous particles and limited liquid splashes.

3M™ Protective Coverall 4540+, L

Excellent barrier against dry particles and certain liquid chemical splash (CE Type 5/6) Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4540+ is made from a laminated premium bicomponent non-woven and features a breathable SMMMS triangular back panel for improved comfort. This soft and lightweight coverall provides an excellent barrier to hazardous particles and limited liquid splashes.

3M™ Protective Coverall 4540+, M

Excellent barrier against dry particles and certain liquid chemical splash (CE Type 5/6) Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4540+ is made from a laminated premium bicomponent non-woven and features a breathable SMMMS triangular back panel for improved comfort. This soft and lightweight coverall provides an excellent barrier to hazardous particles and limited liquid splashes.

3M™ Protective Coverall 4540+, XL

Excellent barrier against dry particles and certain liquid chemical splash (CE Type 5/6) Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4540+ is made from a laminated premium bicomponent non-woven and features a breathable SMMMS triangular back panel for improved comfort. This soft and lightweight coverall provides an excellent barrier to hazardous particles and limited liquid splashes.

3M™ Protective Coverall 4545, L

Designed to be comfortable but highly protective to CE Category III, Type 5/6 hazardous dusts and limited liquid splashes Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4545 is made with a sophisticated bicomponent non-woven which offers high tensile strength and is covered with an ultra-low linting microporous laminate to provide an excellent barrier to hazardous splash, infective agents and particles.

3M™ Protective Coverall 4545, XL

Designed to be comfortable but highly protective to CE Category III, Type 5/6 hazardous dusts and limited liquid splashes Soft and light, ultra low-linting laminated microporous material that drapes and hangs well over the body facilitating ease of movement 3 panel hood, 2-way zip and storm flap with sealable tape with elasticated back and ankles to reduce the risk of skin exposure Knitted cuffs and elasticated waist and ankles for increased comfort and freedom of movement Anti-static coating EN 1149-5 reduces static discharge and the risk of sparks EN 1073-2 nuclear particulate hold out 3M™ Protective Coverall 4545 is made with a sophisticated bicomponent non-woven which offers high tensile strength and is covered with an ultra-low linting microporous laminate to provide an excellent barrier to hazardous splash, infective agents and particles.

3M™ Repositionable 75 Spray Adhesive, Transparent, 500 ml

Finger-touch, targeted control ensures minimal overspray, waste, and cleanup Low soak-in formula allows it to bond delicate substrates without damaging the material Adhesive remains tacky to allow materials to be repositioned repeatedly Formula resists bleeding, staining for reliable and effective performance Dries clear, produces a smooth glue line and resists wrinkling on most materials to produce a clean appearance 3M™ Repositionable 75 Spray Adhesive is our versatile pressure sensitive adhesive spray, suitable for temporary holding or positioning of lightweight materials for display or prior to final assembly. It adheres in seconds, yet has an extra-long tack range that allows lifting and repositioning of materials. Adhere materials in seconds for display or prior to final assembly with 3M™ Repositionable 75 Spray Adhesive. Our versatile pressure sensitive spray adhesive is suitable for temporarily holding or positioning of lightweight materials. It has an extra-long tack range that permits lifting and repositioning of materials. It’s low soak in formula allows it to join delicate substrates without damaging the material. The formula resists bleeding, staining for an effective and reliable performance. Our spray adhesive dries clear, makes a smooth glue line and resist wrinkling on most materials for a clean appearance.

3M™ Reusable Coverall 50425, L

Reusable coverall for general workshop tasks Washable Lint free Knitted cuffs Knee pads for comfortable kneeling Two-piece hood with toggle for head protection & adjustable fit Robust, two-way zipper covered by a protective stormflap. Storm flap has hook & loop fasteners for a secure yet reusable closure Three pockets, two on the front and one on the back Anti-static treated material to prevent nuisance discharges Triangle acts as a vented back panel for extra comfort & reduced heat stress Front pockets provide easy two-way access to the wearer’s clothes and pockets beneath the coverall The 3M™ Reusable Coverall 50425 provides user and garment protection in a wide variety of environments and situations. Extremely comfortable, it is made from a lightweight, breathable polyester. The coveralls provide wide leg openings with adjustable hook and loop straps around the ankle, making it easy to put on and remove, even when wearing boots. Typical applications include paint spraying (water based paint, non-hazardous), dusting, sanding and plishing, general body and mechanical work and preparation, cleaning and area maintenance.

3M™ Reusable Coverall 50425, M

Reusable coverall for general workshop tasks Washable Lint free Knitted cuffs Knee pads for comfortable kneeling Two-piece hood with toggle for head protection & adjustable fit Robust, two-way zipper covered by a protective stormflap. Storm flap has hook & loop fasteners for a secure yet reusable closure Three pockets, two on the front and one on the back Anti-static treated material to prevent nuisance discharges Triangle acts as a vented back panel for extra comfort & reduced heat stress Front pockets provide easy two-way access to the wearer’s clothes and pockets beneath the coverall The 3M™ Reusable Coverall 50425 provides user and garment protection in a wide variety of environments and situations. Extremely comfortable, it is made from a lightweight, breathable polyester. The coveralls provide wide leg openings with adjustable hook and loop straps around the ankle, making it easy to put on and remove, even when wearing boots. Typical applications include paint spraying (water based paint, non-hazardous), dusting, sanding and plishing, general body and mechanical work and preparation, cleaning and area maintenance.